Keycaps with Tetris blocks for cherry mx switches.

Each block is available with all the possible rotations.

You can switch to the desired color with a layer height modifier starting at 9mm for any block. I did not use the tetris company colors by default. But you can simply tell AMS to use another color when preparing the print and it will work without having to modify the print profile.

I used a 0.4mm nozzle for the test prints; it is not mandatory to have a 0.2mm nozzle to print these. But it is advised to print at 0.12mm layer height or below.

You can print one of each, or select the orientation you want out of all the possible combinations.

Supports are not required, but inner/outer brim is strongly suggested. If you have great bed adhesion you can to print without brim and support at all.

Tested on my keyboard, they fit like a charm and stay in place better than my original keyboard keycaps.

Happy printing !