Meet Chester the Cocktail Lounge Monkey… a very distinguished AI Generated gentleman, out and about town !

Had Fun with this one while learning the Hueforge Ropes !! I even shared a glass of brown liquor with Chester on the journey.

Hueforge describe for my iteration as follows:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.5
PLA Inland Tough Brown Transmission Distance: 1
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA PolyTerra Army Beige Transmission Distance: 0.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA PolyTerra Pastel Peanut Transmission Distance: 0.5
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA Overture White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Brown
At layer #10 (0.88mm) swap to Dark Brown
At layer #14 (1.2mm) swap to Army Beige
At layer #16 (1.36mm) swap to Latte Brown
At layer #19 (1.6mm) swap to Pastel Peanut
At layer #22 (1.84mm) swap to Pastel Peach
At layer #25 (2.08mm) swap to White for the rest.