2024-10-31更新，我发现A1新版本机器在龙门架下方有两颗螺丝，干涉了，现在更新版本修复干涉位置。

新版本，修改了盒子与X轴电机干涉的问题

建议按照3MF文件中所提供的支撑方式来打印

热爱这个世界

Updated on October 31, 2024, I found that there are two screws under the gantry of the A1 new version machine that interfere. The updated version fixes the interference position.

New version, modified the issue of interference between the box and the X-axis motor
Suggest printing according to the support method provided in the 3MF file
Love this world

需要M3的螺丝进行固定，长度在5mm到20mm

3mf文件仅用于参考摆放位置

打印参数请根据材料作修改

M3 screws are required for fixation, with a length ranging from 5mm to 20mm
3mf file is only used for reference placement position
Please modify the printing parameters according to the material