Handle for Cardboard Box - Parametric

NO SUPPORTS! EASY ASSEMBLY

There is a standard model but if you want some specific size, you can use the parametric model for Fusion360.

1. Choose the model: print the STL or make your own size with the parametric model.
    
2. Print the model: I did it in PLA. 
    
3. Gather the materials: you will need the box you want to handle, the 3D printed handle and stopper, a pencil and a cutter. 
   
   
   
    
4. Draw the holes: draw the holes on the cardbox using the stopper piece as a template.
   
   
   
    
5. Cut the holes: carefully, cut the holes with the cutter.
   
   
   
    
6. Place the stopper: place the 3D printed stopper in the inner part of the box and insert the 3D handle through the holes on the outer side of the box.
   
   
   
    
7. USE IT!