This is Mk 2, using labels for all the different encounter sets (to be printed in colours).

Print the three layers (Backplate, Middleplate and any Frontplate) one on top of each other.

Inspired by [https://boardgamegeek.com/filepage/187978/marvel-champions-card-game-horizontal-dividers-mic](https://boardgamegeek.com/filepage/187978/marvel-champions-card-game-horizontal-dividers-mic).

A note on printing in multiple colours

My printer (XYZPrinting's DaVinci Junior Pro) also doesn't support printing in multiple colours.

This is how I usually do:

1. I load the black PLA and I print the back layer
2. Leaving the back layer in the printing area, I load the white PLA and I print the middle layer
3. Leaving the first two layers in the printing area, I load the PLA of the color that I need and I print any of the top front layers.

Each time you load a layer into your printing software, empty the scene and position the new layer at the very same X, Y coordinates of the previous layer.
Also make sure to raised the layer by a factor equal to the combined thickness of the other layers currently present on the physical printing area (Z coordinate).

My printer doesn't allow models to float in mid air, so I usually add a small cylinder (1x1mm and as much tall as the layers currently present on the physical printing area): by doing so, the software doesn't land my object automatically.
Put the cylinder far away from the main object to make sure that your nozzle doesn't inadvertently hit your model when travelling around.
Last but not least, remember to remove the cylinder (just the cylinder) from the printing area before printing a new layer if you decided to put it in the same position of previous layer's cylinder or place the new cylinder in another corner of your plate, away from your model.