This is a small storage box with a lid that features a beautiful Kumiko pattern. All parts can easily be printed without supports.

I've included four different options to divide the box:

• Option A (pictured) divides the internal section in 2
• Option B - No division
• Option C - Two levels, bottom is divided in three sections and top is not divided
• Option D - Divided in 3 sections (same as option C but single level)

External Dimensions:

• Width: 126.10mm
• Depth: 82.10mm
• Height: 43mm

Internal Dimensions (without division, option B):

• Width: 114mm
• Depth: 70mm
• Height: 35mm

Additional information:

• A1 Mini compatible
• Glue is not required, all parts were designed with very tight tolerances and snap together.
• All parts are printed, no hardware.
• See exploded view in photos for the installation sequence.
• The “ring” part is optional to give an extra line in the middle of the box. It can be omitted without changing anything else.

*Warning: Given the tight tolerances between parts, I am not sure that scaling this model will give good results. Parts may be too loose or too tight.