半自动旋转展示台/Semi automatic rotating display stand

常见的diy展示台由于使用电机驱动或手动旋转，内部所需空间较大，所以设计成品均高度较高，

此展示台使用外置螺丝刀wx242驱动，内部使用蜗轮和蜗杆结构，实现较小的内部占用，超薄的展示台高度。

展示台直径12cm，高22cm

使用wx242螺丝刀驱动，理论空载320RPM，通过内部蜗杆减速，实现展示台转一圈17s左右，足以应付临时拍摄需求。

The common DIY display stands require a large amount of internal space due to the use of electric motors or manual rotation, so the designed finished products are all high in height,

This display stand is driven by an external screwdriver Wx242 and features a worm gear and worm structure inside, achieving a smaller internal footprint and ultra-thin display stand height.

Display stand with a diameter of 12cm and a height of 22cm

Driven by a Wx242 screwdriver, with a theoretical no-load speed of 320RPM, the display table can rotate for about 17 seconds through an internal worm gear reduction, which is sufficient to meet temporary shooting needs.

Descrição