I developped this deburring tool: a small, easy-to-print tool that's incredibly practical.

INSTALLATION:

1. Place the small bit holder inside the head cap.
2. Tighten the head cap halfway.
3. Insert the deburring bit and slide it back and forth until it's properly positioned.
4. Fully tighten the head cap to secure the deburring bit in place.

REMOVE IT:

1. Fully unscrew the head cap.
2. Push the deburring bit into the head cap, then detach the bit holder located at the rear of the cap.
3. With the bit holder removed, the deburring bit can be easily taken out.

BENEFITS:

• Designed for FDM Printing
• No Support
• Smooth Operation