python hueforge

python hueforged

Here you can find all my HueForge creations[https://makerworld.com/en/@MicheleMM3D/collections/503504](https://makerworld.com/en/@MicheleMM3D/collections/503504)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #4 (0.56mm) swap to Beige
At layer #7 (0.8mm) swap to Jade White
At layer #13 (1.28mm) swap to Orange
At layer #16 (1.52mm) swap to Yellow for the rest.

Descrição