Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x118.63mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA Polyterra MutedGreen Transmission Distance: 0.2
PLA Polyterra Army Dark Green Transmission Distance: 0.3
PLA BambuLab Matte Grass Green Transmission Distance: 0.3
PLA Polyterra Lime Green Transmission Distance: 2.3
This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #11 (0.56mm) swap to Charcoal Black
At layer #15 (0.72mm) swap to MutedGreen
At layer #17 (0.8mm) swap to Army Dark Green
At layer #28 (1.24mm) swap to Grass Green
At layer #32 (1.4mm) swap to Grass Green
At layer #34 (1.48mm) swap to Lime Green for the rest.