Front bench slight block for an AR-15 style A-Frame front sight. This block can be used to remove or install the pins to remove or attach a front sight to the barrel. I included a left and right version of the block depending on which way you need to press the pins out or install them. This block also has the holes to remove the gas tube pin and the sling attachment pin. I also included a support piece to help hold the barrel up during the process. I used this on my front sight removal and it worked great, so I figured I would share since the ones I found online seem either overpriced or not great. I printed mine out of PETG to make it tough. It probably could be made out of PLA, but I have not printed that. Let me know if you have issues.

IMPORTANT!!!! - Be sure to measure the pin diameter to make sure you are pressing the pins out in the correct way. This is not standard for manufactures.

My other gunsmithing designs can be found here:

[https://makerworld.com/en/collections/1273204-ar-15-gunsmithing](https://makerworld.com/en/collections/1273204-ar-15-gunsmithing)