Show your pride and admiration for your Bambu printer by adding this customizable P1S Printer keycap to your keyboard!

It is customizable by adding your own model inside the printer - simply open the STL and import a model, shrink it and put it on the “build plate”. Of course, you'll want to add a model that doesn't require supports since, removing them might be a pain :-) For example you could add a benchy or whatever you like. I've added an STL that has a ghost inside as an example.

If you aren't interested in customizing it and would like a solid version, I have that available here: [https://makerworld.com/en/models/435784#profileId-340869](https://makerworld.com/en/models/435784#profileId-340869)

The keycap is a standard size, fitting the 1U key size so it should fit without any problem. It uses a conventional switch profile (cross) so it is compatible with most switches.

Print profile is slowed down on outer walls and bridges. Also, I recommend making sure your build plate is clean. You could add a brim if you are having difficulties printing it, but I found I did not need it. Highly recommended to keep 0.06mm layer height for best results.

Enjoy!