This is a hueforge I made from a MockingJay Part2 Poster.

I have used the folowing 5 filaments and swaps:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Geeetech Black Transmission Distance: 0.1
PLA+ Sunlu Grey Transmission Distance: 1.3
PLA Geeetech New Grey Transmission Distance: 1.1
PLA Geeetech White Transmission Distance: 4
PLA BasicFil Red Transmission Distance: 3.9

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Grey
At layer #14 (1.2mm) swap to New Grey
At layer #21 (1.76mm) swap to White
At layer #30 (2.48mm) swap to Red for the rest.
 

The 3MF file is for one Bambu AMS

Slot 1: PLA Geeetech Black / PLA BasicFil Red

Slot 2: PLA+ Sunlu Grey

Slot 3: PLA Geeetech New Grey

Slot 4: PLA Geeetech White

For the red filament just swap the black from slot 1 after AMS is switching ans printing from slot 2

As frame I used my own remix: PhotoFrame-160x240