This is a modular coffee station organisation system inspired by Gridfinity (but built on a 78mm base instead of 42mm, because many coffee/espresso accessories are larger).

As this is a work in progress, I'd love any productive feedback you have. Are there things you wish were included? Please let me know :)

Update 2024-08-17:

By request, added a combo basket and screen holder.

The system includes baseplates that are designed for 6x2mm press-fit magnets (3x3 down to 2x1); all included in the baseplates print profile.

Included accessories to go on top (so far) include:

• 1Zpresso K-max holder (this may suit other models - please let me know!)
• Base for 58.5mm tamper, or other tools with a 58mm base (see pic of People's WDT inside the same base).
• A wider (61mm) and deeper base, which I use to hold my Decent Espresso Filter3 basket.
• Paper-filter holder (suitable for 58mm or smaller).
• Espresso basket holder (holds 2x baskets).
• Puck screen holder (up to 3x 2mm thick screens). This has holes that go all the way through, for draining/drying (you may choose to place a paper towel underneath).
• A combo basket and puck screen holder (1 basket, 2 screens).
• Dosing tube holders for 4, 8 or 12 tubes (in 1x1, 2x1 and 3x1 unit configurations - pictures for this coming soon).
• Several trays, from 3x3 down to 1x1.

Each top unit is designed to minimize sharp corners inside, so they're easier to brush down (let's face it, coffee particles love to invade…)

Printing tips:

Ironing is on for the top layers, since there is a lot of flat surface. This produces a nicer-looking finish. You may choose to turn it off for a faster print, but I think it's worth leaving on.