这个是一个菠萝屋小夜灯，参考海绵宝宝菠萝屋设计，打印时不需要支撑，光源使用拓竹LED灯组件。

This is a pineapple house night light, referring to the design of SpongeBob SquarePants pineapple house, it does not need to be supported when printing, and the light source uses a Bambu Lab LED Lamp kit-001.

组装过程：1.将窗户 1与窗户 2组装起来，并用胶水固定。

Assembly process: 1. Assemble window 1 and window 2 and fix them with glue.

2.将烟囱组装起来并用胶水固定。

2.The chimney was assembled and fixed with glue.

3.将门、窗户1、窗户2和烟囱装到菠萝上并用胶水固定。注意：窗户1与窗户2不相同，安装时尝试旋转零件确保零件相互紧贴。

3. Attach the door, window 1, window 2 and chimney to the pineapple and secure it with glue. Note: Window 1 is not the same as window 2, try to rotate the parts when installing to make sure the parts fit snugly against each other.

4.将拓竹夜灯组件装入底座，将底座装入菠萝，注意线槽位置。

4. Load the Bambu Lab LED Lamp kit-001 assembly into the base, load the base into the pineapple, and pay attention to the position of the wire duct.