This picture frame is the perfect way to add a personal touch to your Easter basket. Easy to print and put together and the text is fully customizable. You can easily scale it up or down depending upon the size of your photo. Just remember to scale BOTH the frame and the base the exact same so they'll fit together after printing AND only scale the base and the frame objects otherwise the holes on the back will scale as well.

If you customize the text make sure that you do not move the text up too far OR increase the size of the text too much otherwise the frame will not be able to snap in properly. You can also make the text flush with the base to avoid this from happening if you want the text to be larger.

The frame clicks into the base and if your printer is well tuned you shouldn't need any adhesive to hold it in place. I did add holes via the slicer for magnets. I used 8X2mm magnets as that's what I had on hand but you can easily adjust the size in the slicer depending upon what magnets you have. You can also remove them altogether if you choose to use thin adhesive magnets.

Hoppy printing!

Commercial license available here: [https://www.patreon.com/The3DSportsBeard](https://www.patreon.com/The3DSportsBeard)
Appreciate my designs? Buy me a beer: [https://buymeacoffee.com/the3dsportz](https://buymeacoffee.com/the3dsportz)