从游戏里抠出来的模型，做了水平切割，通过三个插槽和插销进行固定，预留了0.2mm的间隙方便装配。分享的版本是平切的，还有一个根据外形凹陷异形切割的版本因为自己要用就没有共享。

-推荐用树状支撑。

-尽量按照我上传的角度进行打印，这样不容易出现问题，是我测试多次得到的较优的打印方案。

-推荐用0.2层高打印。

-插销要是尺寸不合适的话可以自己微调一下缩放再打印，建议先打一个试一试。

The model extracted from the game was horizontally cut and fixed with three slots and pins, leaving a 0.2mm gap for easy assembly. The shared version is flat cut, and there is also a version that is cut according to the concave and irregular shape of the shape, so it was not shared because I wanted to use it myself.

-Recommend using tree support.

-Try to print according to the angle I uploaded as much as possible, so as not to encounter problems easily. This is the best printing solution I have tested multiple times.

-Recommend printing with a height of 0.2 layers.

-If the size of the plug is not suitable, you can make slight adjustments to the scale before printing. It is recommended to try printing one first.