I created this to increase my workspace below my workbench for a soldering station originally. I used heavy duty hardware sliding rails that you might use for a keyboard or something similar but this adds enough room to allow a desktop soldering station and electronic power supply, etc…. Select the length you need and use the screws to clamp the printed rail bracket extensions together.

You will need;
- 3mm cap or button screws x 20mm and nuts x 2 for each holder = 8

- 3mm cap or button screws x 16mm and nuts 2 for each rail bracket extension = 8

- Use hardware provided by kit to attached rail bracket extensions to hardware rails
- 16 counter sunk wood screws(there are some provided in kit, but you may need to use other, more appropriate lengths depending on weight you're holding up)

- 1 kit from amazon linked below

Location of the rails I used:
[https://www.amazon.com/gp/product/B07GJ838R8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1](https://www.amazon.com/gp/product/B07GJ838R8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)