A Knight Templar printed with Hueforge 0.08mm configs in Bambu Studio .

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Silver Transmission Distance: 0.4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 6

Use slot one for the 5th color; you can swap it as soon as it is done that layer and resume from your phone if away.

Swap Instructions:
Start with Black
At layer #10 (0.88mm), swap to Blue Gray
At layer #13 (1.12mm), swap to Silver
At layer #15 (1.28mm), swap to Beige
At layer #18 (1.52mm,) swap to Ivory White for the rest.