Thrustmaster MFD Cougar Profile Mount

I am new to 3d printing and modelling, however with a lot of persistence and my desire to create a mount similar to the Monstertechs MFD Mount system, I present the first published revision (I made the holes slightly bigger as it was tight).

I looked around and couldn't find something which would fit my setup, as I use a keyboard tray too and mounting this on the profile directly would be in the way. So I took to monstertech for inspiration and also didn't want to pay £59 just for a piece of metal to hold it in place (more than each MFD!)

This print was designed to mount onto a Monstertech desk/rail mount (or any other 40x80 profiles), all you need is some sort of hinge (Elesa CFA.65-ERS-SH-6 is the one I use) or if you wanted you could mount it flush to your profile with an T nut insert and m5/m6 screw.

If you unscrew the original side and top screws of the MFD, then reinsert them once slid into the profile and poke the USB cable out the back (or wherever you like) then fix to your profile of choice.

Print settings;

I printed this at a 15% infill, using both a hex and Gyroid pattern with a 0.2mm first layer using a PLA Matte from Bambulabs, it took around 1h30 (Sport mode) and used 63g of Filament.

It was printed on a brand new Bambulabs P1S with AMS.

Free for anyone to use, download and remix. Please do not use for Commercial purposes!