Summary

Spools designed to be printed with 50g of material or less per side and hold the Proto-pasta Endless Pastabilities subscription filament samples nicely while printing. Spools are designed to hold both the 50g and 100g 1.75mm filament samples. The spools have a solid edge for edge rolling systems and a 50mm center for mounting on most spindle based spool holders

Spools shown in the pictures were printed using filament remnants from the first subscription materials using the Mosaic Manufacturing Palette Pro 2. Check out the Endless Pastabilities filament subscription on Proto-pasta's website.

For more information on sample filament handling see our blog post at [https://www.proto-pasta.com/blogs/how-to/effective-loose-coil-handling-for-a-positive-experience](https://www.proto-pasta.com/blogs/how-to/effective-loose-coil-handling-for-a-positive-experience)

Print Settings

Printer Brand:

Ultimaker

                                            Printer:                      
Ultimaker 2 Extended

Rafts:

                                            Supports:                      
Yes

Resolution:

0.2

                                            Infill:                      
10

Filament:

Proto-Pasta PLA

                any                    
                        Notes:                     Gyroid Infill (10% gyroid infill allows for lower material usage, may have to do a higher percentage to get decent top layers with other infill patterns)

2 top and bottom layers at 0.2mm
2 perimeters on a 0.4mm nozzle

Again, all printed relatively thin because it's not needed for structure and allows for quicker printing in time and less material usage.

Descrição

Summary

Print Settings

Protopasta Subscription Sample Spool