Model
This model is for mounting a kitchen scale to a wall or underside of a cupboard. It can be used for kitchen scales with a thickness up to 14mm , you can choose the width when mounting to fit your scale.

Measurements

The length of the model is 230mm, this includes a stopper of 3mm thick.

In the files you can find versions of a 3mm and a 5mm wall thickness. The 3mm version was more than enough to hold the weight of my scale, it saved me some filament, but feel free to use the 5mm if you want the extra security.

Mounting/Installing
You can mount the holder in two ways:

1. Using screws with a maximum width of 4mm, this ensures that you wont break the printed model as the holes are 5mm wide. The countersink holes will make sure that the screws don't damage your scale.
2. Using double sided tape, the model has a slot on the backside where you can place the tape. This way the seam between the holder and surface will be minimal

If you have any questions about the model or if you would like a customized version, please feel free to contact me!