Hat/Cap Hanger (Dual)

I have designed a dual hanger that allows me to hang my caps (snapback) in my closet. This model allows for two caps to be hung on the same hanger and is printed as a single piece.

There are 4 different hook designs.

- Stadium shaped hook (designed for my needs) with an end diameter of 15mm (Plate 01)
- Cylindrical shaped hook, 25mm Diameter (Plate 02)
- Cylindrical shaped hook, 20mm Diameter (Plate 03)
- Cylindrical shaped hook, 15mm Diameter (Plate 04)

Machine Configuration
Printer: Bambu Lab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle
Filament: Bambu Labs PLA Matte

Process settings for this print.
0.20mm Standard (Hat Hanger) - Default with the below changes -

Strength
Wall Loops - 4
Detect Thin Walls - Checked
Sparse Infill Density - 24%

Support
Enable Support - Checked
Type - Normal(auto)

Others
Brim type - No-brim