Passthrough Pyramid & Cone - Big Version - FULLSET

This is a new* addition to my passthrough collection. It takes quite a lot of filament and time, being a big version of my Pyramid and Cone Impossible Passthrough fidget. But it can be worth it, especially if printed with cool filament. 

This model if a combined FULLSET of all sizes of pyramids and cones. In the first profile there are four different heights of pyramids, and the second contains the same with cones.

Why can't you just scale it up?

I changed a few things, including the addition of chamfers, and I also changed the tolerances. It you scaled up to 250%, (basically what this model is/2.5X scale) the tolerances would be too large. However, it is still worth increasing the tolerances a little bit. The tolerance for this model is 0.6 mm. So, don't worry if printing with silk.

The two parts are in different plates, but if you want to combine them for a color-changing filament (both parts, not what I did) you can put them on the same plate, but I would recommend not putting them inside of each other, just in case.

*I finished designing the model around or after October 2025 and put it off for a really long time. I know you don't care, but I think it's funny.