Ultimate Shapes Pack - 23 Different Primitives — STL Grátis

Ultimate Shapes Pack - 23 Different Primitives

The Ultimate collection of primitive shapes is here! The creativity sets the limit and these are the foundation. They could work brilliantly as a toy, visual model, decoration or education tool. This pack comes with three additional shapes that wasn't a part of the stand-alone shapes (No. 3, 7 & 20).

3 Print Files

Standard 35mm Grid: 23 On One Bed
- 246.8g, 16h6m
Standard 35mm Grid: One per Plate
- See Table for exstensive information.
MINI 15mm Grid: 23 On One Bed
- 31.8g - 2h41m
- Much faster and way less material. This will fit any print plate, but some shapes will suffer in structual strength. 42.857% Scale.

The pack comes with 23 different types of volumetric polygons and they're all listed, named and measured to the best of my ability.

Prints and Measurements (mm)
No.	Name	Length / Outer	Width / Inner	Thickness / Height	Time	Material
1	Coil, Spring*	35	25	35	1h54m	16g
2	Donut, Torus*	35	10	12.5	24min	4.8g
3	Thin Donut, Torus*	35	21.12	6.94	17min	2.7g
4	Ring, Torus*	35	25		13min	1.86g
5	Corner, Orthogonal Trihedron	35	25	10	44min	10.8g
6	Wedge	35	-	35	41min	9.4g
7	Faceted Wedge - Irregular Hexahedron	31.66	31.66	35	29min	5.5g
8	Pentagonal Prism	35	35	35	42min	10g
9	Rounded Ramp	35	35 / Ø35	35 / 10	44min	10.3g
10	Quarter Pipe	35	35 / Ø35	35 / 17.5	53min	13.26g
11	Half-Pipe Ramp	70	35 / Ø35	35	1h33m	25.65g
12	Brick (Rectangle, Full)	70	35	17.5	1h11m	17.1g
13	Box (Rectangle, Half)	35	35	17.5	35min	9.2g
14	Cuboid (Rectangle Double)	35	35	70	1h47m	28.6g
15	Rod Cylinder	25	-	70	59min	13g
16	Stairs	35	35	35 / 23.33 / 11.67	49min	12.3g
17	Ball, Rhombicuboctahedron*	24.9	24.9	24.9	23min	3.64g
18	Pipe Cylinder	35	25	35	48min	10.9g
19	Pyramid	35	35	35	35min	7.4g
20	Circle, Disc	35	-	1.05	9min	1.33g
21	Cone	35	-	35	30min	5.8g
22	Cylinder	35	-	35	48min	12.4g
23	Cube, Block	35	35	35	59min	15.6g

*Can be better with the adaptive layer setting, but is currently off as default.

Some shapes e.g. the sphere, the square, the triangle and the common prisms (dice prisms) are missing for a myriad of reasons. But if this gains enough traction, i could make a Deluxe edition.

I recommend printing one object for the best result, but obviously it's much easier to print the whole thing or a selection of things at once.

The Coil / Spring #1 is the only object that need supports and they are straight out of a nightmare, but the coil is quite fun and springy. And it slides around the rod cylinder perfectly.

Hope you have fun with the prints!

You can also get 20 of them as stand-alone prints by clicking here.

Check out my other creations:
Late's amazing and wonderful creations

Descrição