Easily generate the exact storage box you need. This design is fully parametric and strictly 3D printed, no extra hardware required.

The lid is completely detached from the base and locks down securely using 4 print-in-place clips.

Included Print Profiles If you want to print right away without customizing, I've included pre-configured profiles:

• 150 x 100 mm base: Heights of 20mm, 30mm, and 40mm.
• 100 x 50 mm base: Heights of 20mm, 25mm, and 30mm.

These profiles include the lid, common for a specific size and 4 height options. You will only need to print one along with the lid. The total used filament will, therefore, be a lot smaller than what the description states.

How to Customize

To keep things simple, the design is split into two files: one for the container, and one for the lid. Just click the green Customize button to begin, select the parameters that best suit your application and download both files! Keep in mind that all measurements are in millimeters (mm). The most important measurements will be the internal lenght and width of the box and then the height for both bottom and top parts. The total height will correspond to the sum of both partial heights!

⚠️ Note: When creating custom sizes, you must apply the exact same dimension parameters to both files. If the settings do not match, the lid will not fit the container.

Make It Your Own

• Personalize it: Use your slicer's text tool to easily add names, labels, or logos to the lid.
• Custom Interiors: The simple internal geometry makes it very easy to design your own custom inserts, tool holders, or grid dividers.

If you design a cool insert or print a personalized box, post your makes! I'd love to see what you use these for.

All feedback is welcome! I am still testing customization embeded into MakerWorld and doing some adjustments on the hinge mechanism. Variation between printers can affect how easy or difficult it is to open and close the box.