Modular solar node box. You can make your own back for different types of mounts that you want to use depending on where you need to attach the module.

You can also change the mount for a different solar panel if you would like. Comes with a mount for 2W planel down below.

Printed with ASA.  Can use other filiments but might fit tight or loose as ASA slightly shrinks.

Back mount needs to be put together. Printed in two pieces. (I put super glue in the middle and then the M2x20 screw for extra strength. 

Print with Tree supports.

Made for:

18650 battery with holder.

Seeed Studio XIAO nRF52840

Extras: Charging module (recommended with low watt panels and will display battery information while charging with solar panel.) You do need to solder the battery connection to the board for battery percentage to show up in the app. Hot glue gun to hold the Seeed Studio and battery holder in place.

Seeed Studio XIAO nRF52840 Module: [https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html](https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html)

U.F.L1 to N type connector: [https://a.co/0d9uBKxW](https://a.co/0d9uBKxW)

ALFA N type 915MHz Antenna: [https://a.co/0fd2cBx5](https://a.co/0fd2cBx5)

USB C Charging Board Module: [https://a.co/03T4200K](https://a.co/03T4200K)  OR A different charging module: [https://a.co/00etGGwj](https://a.co/00etGGwj)

2watt Solar Panel(one in the photo: [https://a.co/0gFvGDzD](https://a.co/0gFvGDzD) ( DISCLAIMER: I dont know why but they dont always make this panel the same side i have noticed. I have 4 panels and 1 of them is 5mm smaller than the others so you might need to adjust the size.

18650 Battery holder: [https://a.co/02ZRxDwW](https://a.co/02ZRxDwW)

Connector wires: [https://a.co/07R6LBhc](https://a.co/07R6LBhc)

18650 Battery: Really can use anyone but this is the brand i use( they have a 3000mah and 4000mah model: [https://www.sofirnlight.com/en/products/gift-sofirn-18650-3000mah-rechargeable-lithium-ion-battery?spm=..collection_5e8878a9-210e-495d-b6ce-ddcba36f0a5b.collection_1.29&spm_prev=..collection_383740ad-8fed-433f-8b50-ab50b4433172.header_1.1](https://www.sofirnlight.com/en/products/gift-sofirn-18650-3000mah-rechargeable-lithium-ion-battery?spm=..collection_5e8878a9-210e-495d-b6ce-ddcba36f0a5b.collection_1.29&spm_prev=..collection_383740ad-8fed-433f-8b50-ab50b4433172.header_1.1)

1 M2x20 screw or 1 M2x25 with nut: [https://a.co/0b4bQ8Sd](https://a.co/0b4bQ8Sd)

OPTIONAL ANTENNA: [https://a.co/0c4lfgix](https://a.co/0c4lfgix)

OPTIONAL PANEL: 5watt Solar Panel (mounting bracket not included)(maybe Ill make one): [https://a.co/087TUzEU](https://a.co/087TUzEU)