You are allowed to print for personal or gift use. You can not print to sell. If you have any feedback or have a suggestion of a print you would like to see, feel free to comment or message me. Happy printing!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Gray  Transmission Distance: 3
    #482960 PLA BambuLab Basic Purple  Transmission Distance: 2.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Gray
    At layer #14 (1.2mm) swap to Purple

Border Only Colors from here until the end.
    At layer #26 (2.16mm) swap to White for the rest.