Hi all, this is a re-post of my original, “Apollo Program Master Alarm Panel” that was recently taken down due to the reference photos not being originals to me.  All photos are now my own.

Originally this started as a desktop fidget, but has grown into a series of models and profiles thanks to your support!

You will need the following parts:

9x 6-32x.3125" slotted pan head screws, for panel “mounting” hardware (https://www.mcmaster.com/90283A145),

2x 6-32x.25" phillips pan head screws, for “mounting” the momentary button (https://www.mcmaster.com/90272A190)

16x 1-64x.375" phillips flat head screws, for guard loop mounting (https://www.mcmaster.com/91771A068),

6x RED toggle switch boots with ends cut off (https://www.amazon.com/dp/B07TVN6TPH?ref=fed_asin_title),

1x Momentary Rect. LED Button (https://www.amazon.com/dp/B01MRWL6JS?ref=fed_asin_title)

CHOOSE: (I went with the original configuration of UPPER 3 SPDT, and LOWER 3 SPST)

3x 12mm SPDT (on-off-on) toggle switches (https://www.amazon.com/dp/B07D7463T7?ref=fed_asin_title),

3x 12mm SPST toggle switches (https://www.amazon.com/dp/B07MFQ4TNK?ref=fed_asin_title).

Thanks and Happy Printing!

WARNING: I am not responsible for your understanding or abilities to safely wire this cover for home/commercial/industrial use… PLEASE use caution when using electricity!