Thank you so much for all the love for my Reading Planter, as well as the Wizard version of it! ♥ 
Here comes the summer variant! 🍓

Waterproofing: It is designed and tested to hold water using the provided settings and recommended filaments. However, you can add more walls if you scale the model up. Also consider using PETG or sealing the interior with a waterproof coating, if needed. 

Assembling: Simply print all four pieces and place the cover + book in the planter’s hands and the crown on top. Gluing is recommended. A small orientation guide is included in the cover and pages to help with alignment. If you print the pot & the crown with the setting “seam in the back”, you can align the seam of the crown with the seam of the pot in the back to get the intended crown position. 

Scaling: The model can be scaled up. To do this, add a cylinder in the Bambu Slicer that matches the diameter of your pot. Place it inside the planter and scale the planter until it fits. Make sure to note the scaling factor so you can resize the crown, book and cover accordingly. 

It's a simple print with all settings already included in the .3mf. If you download the STL Files, please take note: 

Print Settings: 
• 0.2mm layer height 
• Seam position in the back 
• 3 walls 
• 15% grid infill 
• tree supports for the pot 
• 5-10mm outer brim with an object gap of 0.3mm for the crown & book parts 
• fuzzy skin contour with a skin thickness of 0.1mm for the pot & crown. The fuzzy skin on the crown is painted on by hand in the slicer to avoid the fuzzy skin on the inside of the crown 

Check the BOM for filaments ♥ 

License:
You’re allowed to sell physical prints if you have an active paid subscription to my Patreon (Tier: 3D Print Seller).

Happy creating and printing!