After looking around briefly and being less than happy with the options I found I decided to model my own eyepiece holder.  I wanted it to fit on the print bed of my A1 mini and I wanted the lid to fit securely and snap in place.  Also, I added “wells” if you will over each eyepiece location so you could stuff a bit of foam in there if you wanted to keep short eyepieces from bouncing around.  I'm posting a link to the original Onshape model for you to edit to your liking.

[https://cad.onshape.com/documents/0a8747c2a30e370d05d7d9ed/w/8954f71370d472356f69e0a2/e/690443ac3f97c3db106a53db?renderMode=0&uiState=6a4953ac55495a9e0c468762](https://cad.onshape.com/documents/0a8747c2a30e370d05d7d9ed/w/8954f71370d472356f69e0a2/e/690443ac3f97c3db106a53db?renderMode=0&uiState=6a4953ac55495a9e0c468762)

The first time you assemble it the cover goes on a little tight but it loosens up a little after a few uses.  I've only been using mine for a few days now so I don't know how long the fit will last.  Fingers crossed…

Added another taller cover for SVBONY redlines…