Headlight Relocator Bracket, Front Plate Setup

Talaria Headlight Relocator for Front Number Plate Setup

This is a simple headlight relocator bracket designed to move the original front light upward, making room for a Motocutz or ODI-style front number plate.

The bracket is intended to let you keep the original headlight while achieving a cleaner front-end look with a number plate installed at the same time.

Update:

2026-07-20
Version 2 print profile, improved strength, will hopefully hold up as good as original.
(Needs 2 pcs of M6 Nuts.)
I havent cared about the turning light bracket in this one as a assume you wont have them if printing this.

Features

Relocates the original front headlight upward
Allows the use of a Motocutz or ODI-style front plate
Uses the original screws
Simple bolt-on style installation
Designed as a lightweight 3D-printable alternative

Hardware

No extra hardware is required.
The original screws are used for installation.

Important Note

Use this part at your own risk.

This is a 3D-printed bracket and I do not take any responsibility for strength, durability, fitment issues, damage, injury, or failure during use. Always inspect the part before riding and make sure it is securely mounted.

Similar brackets are available commercially in steel, which may be a better option if you want maximum durability.

Recommended Use

This part is best suited for light-duty use, testing, mock-up, or cosmetic setups. For aggressive riding, off-road use, or high-vibration environments, consider using a metal bracket instead.

Descrição