Build the foundation of your own interchangeable bourbon marquee collection with this Bourbon Marquee Arrow Light Base from Chopper Originals.

This listing includes the complete marquee frame, lower illuminated BOURBON lens, and all components required to build the sign. Simply choose your favorite interchangeable top lens from the Marquee Collection to customize the finished display.

Designed as a fully printed multi-piece build, the sign combines backlit artwork, vintage-style marquee bulbs, and a hidden-wire frame system to create a striking display for your home bar, bourbon lounge, garage, game room, or man cave.

The completed sign measures approximately 27.25" tall x 9.25" wide x 3" deep and prints on a standard 256 mm build plate.

Compatible with all Chopper Originals Marquee Collection top lenses located here.

Be sure to check out the Marquee Collection for additional interchangeable whiskey and bourbon brand artwork.

Features

• Complete marquee frame
• Includes illuminated BOURBON lower lens
• Compatible with all Marquee Collection top lenses here
• Modular construction
• Double-sided design
• Hidden internal wiring
• Vintage marquee bulb lighting
• Wall mount design
• Standard 256 mm printer compatible

Printing Notes

This listing includes:

• Complete frame components
• Lower BOURBON artwork panels
• Assembly hardware printed as part of the model

All frame sections connect together using integrated keyhole slots and alignment features.

The artwork panels are designed as a friction fit into the frame. While they fit securely on their own, a small amount of double-sided tape is recommended if the sign will be installed in an area where it may be frequently touched or handled.

Lighting Required

This project uses two separate lighting systems that can be sourced at these links:

Backlighting

• COB 16.4/5M LED Strip Lighting (You will use the majority of the strip and just cut off the excess)

Marquee Bulbs

• 4-Socket C7 Light Cord
• C7 Waterproof Shatterproof Globe Bulbs

Assembly Overview

1. Print all frame and artwork sections.
2. Assemble frame sections using the integrated keyhole connections. ( pay attention to top vs bottom )
3. Install the marquee light sockets into the middle frame. ( snug fit but they will go and snap into place, make sure all support material is removed)
4. Install LED strip lighting inside the upper ring and body. (leave loose at screw holes or try to avoid them) 
5. Route wiring through the internal frame supports with whatever works best and secure with small zip ties or black tape.
6. Mount frame to wall using screws of choice. 
7. Insert artwork panels into the frame.
8. Secure panels with double-sided tape if desired. [https://amzn.to/3QMrn49](https://amzn.to/3QMrn49)
9. All lights should come on with the one inline switch of the C7 cord.

Dimensions

• Height: ~27.25" (692 mm)
• Width: ~9.25" (235 mm)
• Depth: ~3" (76 mm)

Filaments Used

• Bambu Basic PLA - Black
• Bambu Basic PLA - Beige
• Bambu Basic PLA - Red
• Bambu Basic PLA - Jade White (Diffusion Layer)

Keywords

bourbon, marquee, arrow, sign, lightbox, base, frame, interchangeable, whiskey, bar, mancave, lounge, decor, led, modular, printable, collection