Mount any thin, rigid flat panel to your pegboard with a simple two-point edge clip — originally designed to hold a wood stain sample board, and it turned out to work just as well for architectural/engineering scale rulers.

Features

• Two-point clip design: one clip near each end of the panel holds it flush and secure against the pegboard
• Fits flat panels up to ~4mm thick (per CAD — see Print notes)
• Works well for: architectural/engineering scale rulers, wood stain sample boards, paint chip cards, and similar thin flat panels
• Snaps directly onto standard 1-inch pegboard — no screws or extra hardware needed
• Same two clips work regardless of panel length — just space them near the two ends of whatever you're mounting

Print notes

Each panel needs 2 clips (one per end). The clip's retention slot is 4mm wide, sized for thin rigid panels (rulers, sample boards, thin acrylic/wood). If your panel is thicker than ~4mm, it won't seat correctly — check your material against this tolerance before printing. No supports needed.

Collection cross-reference

Part of my Pegboard Hooks and Holders collection — check out the rest here: [https://makerworld.com/en/collections/15830041-pegboard-hooks-and-holders](https://makerworld.com/en/collections/15830041-pegboard-hooks-and-holders)