A fully parametric Gridfinity-compatible storage bin, built from scratch in OpenSCAD and tuned for the MakerWorld Customizer. Set your own size, compartments, and features, then download a print-ready model in seconds — no CAD software required.

FEATURES
- Spec-accurate Gridfinity base profile (42mm grid, 0.5mm clearance, standard 3-step stacking lip) — fits any standard Gridfinity baseplate
- Adjustable size: 1–6 units in X, Y, and Z
- Optional internal dividers, evenly spaced, with adjustable thickness
- Optional magnet holes (4 corners) with a built-in support-free chamfer
- Optional 45° finger scoop for easy one-hand access
- Optional lightweight floor relief to save filament
- Adjustable wall thickness and inner corner fillet
- Prints with zero supports in standard orientation

HOW TO CUSTOMIZE
Hit "Customize" on this page (or open the .scad file in OpenSCAD) and adjust the sliders — bin size, number of compartments, magnets on/off, finger scoop on/off, wall thickness, and more. Every combination is validated automatically, so you can't generate a broken model.

PRINT SETTINGS
- Layer height: 0.2mm (0.12–0.16mm for extra-clean walls)
- Wall loops: 3+ recommended
- Infill: 15% is plenty for a storage bin
- Supports: none needed
- Orientation: print as-is, base down
- Material: PLA or PETG both work great
- If using magnets: pause and insert 6x2mm magnets at the prompted layer, or print the holes empty and glue magnets in afterward

If you print this, I'd really appreciate a photo upload and a Boost — it helps a lot and costs nothing! Questions or feature requests are welcome in the comments, I read all of them.

MAKE SURE TO VISIT MY PROFILE FOR MORE MODELS