Parametric grid display stand — set your own size in one click.

A lightweight shelf with an **open square grid** top (see-through cells, not a solid plate), thick frame rim, four corner legs, and optional corner gussets for extra stiffness. Great for figurines, cards, miniatures, plants, or desk organization.

**Click Customize** to set:
• Inner length & width (grid area)
• Leg height
• Frame border width
• Grid pitch & bar thickness
• Leg size & corner gusset

Default size: **150 × 100 mm** inner grid, **75 mm** leg height (~**174 × 124 × 82 mm** overall).

**Fits build plates up to 256 × 256 mm** (Bambu X1/P1). Model is centered on the bed. If you exceed your printer size, the customizer will show an error — shrink length/width or leg height.

---

### How to print

1. Click **Customize** → set your dimensions → **Download** (3MF).
2. Open in **Bambu Studio** (or your slicer).
3. **Important:** After Customize download, choose your **filament and print settings** in the slicer (see recommended PETG profile below). Customize gives you the size — you still pick material & quality.

**Orientation:** Print as downloaded — **legs on the build plate**, shelf on top.  
**Supports:** None needed.

---

### Recommended print settings — PETG (default)

Tested style for strong functional parts (Elegoo / generic PETG on Bambu):

| Setting | Value |
|---------|--------|
| Material | PETG |
| Nozzle | 240 °C (first layer 245 °C) |
| Bed | 75 °C (first layer 80 °C) |
| Part cooling fan | 35 % (from layer 2) |
| Layer height | 0.20 mm |
| Walls | 2 |
| Top / bottom layers | 5 |
| Infill | 15% gyroid |
| Print speed | 45 mm/s |
| Outer wall speed | 35 mm/s |
| Bridging | 20 mm/s |

**Dry PETG** 6–8 h at 65 °C if stringy or wet.

**Light display use only?** PLA works too — 3 walls, 15–20 % infill, standard PLA temps.

**Gusset tip:** Default gusset (14 mm) adds corner strength. Set **0** for a minimal look; increase for heavier loads.