Celebrate the release of the Five Nights At Freddy's 2 movie with this unwithered springbonnie  cosplay head!
This accurate mask can be printed on any regular printer and is made to be big enough to fit most sizes of head.
All of the revenue from this mask helps support the Springlock Suit project I have, don't hesitate to check it out!

The shell parts (face, head, jaw, ears and teeth) should be printed at low infill with cubic infill type- or anything with a similar strenght.
The support piece should be printed with high infill and horizontal to the print bed.
For better comfort, don't hesitate to add foam padding inside the head.
To assemble this suit, you will need M6 screws and bolts, as well as super glue.
Firstly, assemble the Face parts together using the grooves to help you positionning them. 
Then; assemble the back head parts together and onto the Support using the screw holes on each sides of the face. Using regular bolts with washers will do the trick.
Assemble the jaw together.
Then, assemble the lower teeth to the Jaw using glue. screw the jaw to the head frame.
Assemble the top teeth. 
assemble the ears together and screw to the frame.
Then, assemble the eyes together and position them inside the head.

and voilà ! You have your own springbonnie Cosplay Head! (FNaF 2)
On the back of the head is a watermark I have put. Do not remove said watermark from the files and claim as your own.