# 🌟 Elegant Twisted Fluted Vase (Premium Solid Version)

Add a touch of modern elegance to your home with this beautiful, organic fluted vase. Featuring a gracefully twisted, wavy silhouette and a flared rim, this design captures light beautifully and creates striking geometric shadows.

Unlike standard thin-walled vase-mode models, this version is designed to be printed as a **solid shell with infill**. This gives it excellent structural strength, thick walls, and a premium, heavy feel—perfect for holding heavy floral arrangements safely.

---

### 

---

### ⚙️ Recommended Slicer Settings

For the absolute best results, do **NOT** use spiral vase mode. Use these settings in Bambu Studio or OrcaSlicer:

* **Wall Loops:** 3 to 4 perimeters (for a strong, premium exterior)
* **Infill:** 10% - 15% (Gyroid recommended for uniform strength)
* **Supports:** **ON** (Use **Tree / Organic** supports to cleanly support the overhanging flared rim)
* **Top/Bottom Shell Layers:** 4 layers each
* **Layer Height:** 0.2mm for standard prints, or 0.16mm for ultra-smooth ridges

---

### 🎨 Filament Recommendations

* **Silk PLA:** Hugely recommended! The shiny finish accents the twisted ridges beautifully.
* **Dual/Triple-Color Matte PLA:** Creates a stunning color-shifting effect as you walk around the wavy geometry.
* **Marble/Stone PLA:** Gives it a heavy, high-end ceramic look.

---

### 💧 Watertight Printing Tip
Because this is printed with traditional infill and perimeters, it is inherently more watertight than a single-walled vase. To ensure it holds real water 100% safely, slightly increase your **Nozzle Temperature by 5-10°C** and increase your **Flow Ratio/Multiplier to 1.02** to fuse the layers tightly.