❤️ ENJOYED THIS PROJECT? ❤️

There’s plenty more where this came from!

From HueForge artwork and bookmarks to lithophanes and custom 3D printing projects, I'm constantly adding new designs.

🔗 Explore all my projects HERE

Follow my profile so you don't miss future releases! 🚀

🎨 HUEFORGE INFO🎨

🎯 Ready-to-print 3MF included

All settings are already configured. Just slice and print.

🌈 FILAMENT COLORS USED

#000000 PLA Anycubic Black  Transmission Distance: 0.1
    #003594 PLA Anycubic Blue  Transmission Distance: 2.6
    #5dd4ff PLA Anycubic Cyan  Transmission Distance: 1.9
    #ffffff PLA Anycubic White Warm  Transmission Distance: 6.2
    #ff8da1 PLA Anycubic Pink  Transmission Distance: 5.2
    #c8112e PLA Anycubic Red  Transmission Distance: 3.6
This print uses 6 unique filaments

⚠️ PRINT SETUP INFORMATION ⚠️

The included .3mf file contains two build plates, both already configured with the correct color assignments, filament changes, and print settings.

🔹 Plate 1 is designed for users with two ACE units (or any setup capable of handling at least 6 colors simultaneously).

🔹 Plate 2 is designed for users with a single ACE unit (or any setup capable of handling at least 4 colors).

🔄 COLOR SWAP LAYERS

Swap Instructions for 2 ace or sistem with 6 color at least (Plate 1)

Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #10 (0.88mm) swap to Cyan
    At layer #13 (1.12mm) swap to White Warm
    At layer #17 (1.44mm) swap to Pink
    At layer #19 (1.6mm) swap to Red for the rest.

Swap Instructions for 1 ace or sistem with 4 color at least (Plate 2)

Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #10 (0.88mm) swap to Cyan
    At layer #11 (0.96) Pause - Change black with Red, Blue with Pink
    At layer #13 (1.12mm) swap to White Warm
    At layer #17 (1.44mm) swap to Pink
    At layer #19 (1.6mm) swap to Red for the rest.

⚠️ IMPORTANT⚠️

• You can resize X/Y freely

• ❗ DO NOT change Z height

👉 If you scale the model, restore the original Z height

otherwise color transitions will be incorrect.