Sakura Metropolis

Thank you for looking at my creations! 💕
If you enjoyed them, don’t hesitate to leave a ❤️ and follow me — it motivates me enormously to continue creating!

World of GLT 3d offers you:

Project: Country Japan.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 134.25x200mm in size

You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.72mm

    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 3.7
    #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 4.4
    #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 2
    #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.4
    #e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #14 (1.2mm) swap to Cobalt Blue
    At layer #17 (1.40mm) swap to Red
    At layer #20 (1.60mm) swap to Pumpkin Orange
    At layer #23 (2.00mm) swap to Cyan
    At layer #28 (2.40mm) swap to Hot Pink
    At layer #31 (2.80mm) swap to White
At layer #33 (3.80mm) swap to Black for the rest.

(Printed on Bambulab H2C)

3D printing : World of Glt 3d

Descrição