A twisting, fluted vase with a full bulbous belly, a long tapering neck, and a softly flared rim. The ribs spiral about a third-turn from base to mouth, so the surface catches light differently as you move around it. Designed to print in Spiral / Vase mode as a single continuous wall — no supports, no infill, fast and clean.

Specs

• Size: ~124 mm wide × 200 mm tall (scales nicely from 60% to 150%)
• Single watertight-ish single-wall body — see note below
• Original parametric design

Recommended print settings

• Spiral vase mode: ON (Bambu Studio → Quality → Special mode → Spiral vase)
• Nozzle 0.4 mm, layer height 0.20–0.28 mm
• Wall line width 0.8–1.2 mm (wider = sturdier single wall)
• Bottom layers: 3–5 · Infill: 0% · Supports: none
• PLA works great; silk PLA or PETG give a nicer sheen on the flutes
• Moderate speed for the crispest ribs

Tip: As a single-wall vase-mode print it isn't reliably watertight. For fresh flowers, drop a glass test tube or a slim jar inside as a liner; otherwise it's perfect for dried stems.

If you print one, post a Make — I'd love to see your color/material choices.