RapidSpool – Bambu-Compatible Spool

Features 

• 🪶Ultra-lightweight (84g): Print up to 11 spools from a single 1kg roll.
• 🚀Rapid Print Ready: Optimized for speed (PLA~2h 41m PETG-3h28m ABS-3h16m on P1S).
• 🔐 Authentic Twist-Lock: Retains the original Bambu Lab mechanism for reliable installation.
• 💧Built-in Desiccant Cavity: Store desiccant inside the spool for AMS moisture control.
• 📍60° Spaced Holes: Evenly distributed holes for easy and flexible filament tucking.

Printing Material Recommendation

• This spool can be printed with PLA, PETG, or ABS. 

  For use inside AMS HT / AMS 2 Pro drying environments, PETG or ABS is highly recommended due to their superior heat resistance.
  • PLA drying temperature: ~45°C
  • PETG drying temperature: ~65°C

   

• The PETG (71°C) and ABS (87°C) versions are fully compatible with the AMS standard drying conditions. For engineering filaments that require drying temperatures above 85°C, the ASA (100°C) or PC (117°C) versions are recommended to minimize the risk of deformation.