简约壁挂沥水置物架

核心特点

1. 功能设计简约长条造型，三面设置围挡边缘，可防止放置的物品滑落倾倒；底部带有条形沥水格栅，通风沥水不积污水，能保持收纳物品干爽卫生，适用于卫生间收纳洗漱用品、厨房放置调料小件等多种墙面收纳场景。
2. 安装方式搭配免钉胶实现壁挂安装，粘贴牢固不易脱落，无需打孔损伤墙面，安装与拆卸都简便易行。
3. 打印便捷性配套已完成优化的配置文件，电脑、手机端仅需选择对应耗材即可一键切片打印，大幅提升打印成功率，新手也能轻松上手。
4. 耗材经济性模型采用无支撑结构设计，打印过程无多余耗材浪费，有效降低打印成本。
5. 参数适配性内置优化后的工艺参数，更换不同耗材时，直接套用对应材料的官方参数即可，无需额外调试校准。

打印提示

• 打印前请确认打印平台干净整洁，请勿用手直接接触打印工作面；若不慎触碰，请清洁干净后再启动打印。
• 模型默认设置为 2 层壁厚。

如果这款模型对您有所帮助，恳请助力支持，非常感谢！

Minimalist Wall-mounted Drainage Shelf

Core Features

1. Functional DesignMinimalist rectangular shape with three-sided raised edges to prevent stored items from slipping or tipping over. The bottom is designed with strip-shaped drainage grilles, which enable air circulation and water drainage without stagnant water, keeping stored items dry and hygienic. It is suitable for various wall storage scenarios, such as organizing toiletries in the bathroom or small seasoning items in the kitchen.
2. Installation MethodIt is mounted on the wall with nail-free adhesive for firm and long-lasting adhesion. No drilling is required, so there is no damage to the wall surface. Both installation and removal are simple and straightforward.
3. Printing ConvenienceComes with pre-optimized configuration files. Simply select the corresponding filament on a computer or mobile device for one-click slicing and printing, which greatly improves the printing success rate and is easy for beginners to master.
4. Material EfficiencyThe model adopts a support-free structure design, eliminating excess filament waste during printing and effectively lowering printing costs.
5. Parameter CompatibilityBuilt with optimized process parameters. When switching between different filaments, you can directly apply the official parameters of the corresponding material without additional adjustment or calibration.

Printing Tips

• Please confirm the print bed is clean and tidy before printing. Do not touch the printing surface directly with bare hands. If you accidentally touch it, clean the surface thoroughly before starting a print job.
• The model is set to 2 wall layers by default. For higher load-bearing capacity and structural strength of the shelf, you may increase the number of wall layers manually.

If this model is helpful to you, your support would be greatly appreciated. Thank you very much!