爱心挂钩

核心特点

1. 外观设计：简约爱心造型，风格时尚百搭，搭配免钉胶安装，粘贴牢固且不伤墙面。
2. 结构优势：采用拆件打印方案，有效规避 3D 打印 Z 轴层间结合力不足的通病，承重性能优于常规一体打印款，拼装步骤简单易操作。
3. 打印便捷：配套已优化的配置文件，电脑、手机端仅需选择对应耗材即可一键切片打印，大幅提升打印成功率。
4. 省料环保：模型为无支撑设计，打印无多余耗材浪费，有效降低打印成本。
5. 参数适配：内置优化后的工艺参数，更换耗材时直接使用对应材料的官方参数即可，无需额外调试。

打印提示

• 打印前请确认打印平台干净整洁，请勿用手直接接触打印工作面；若不慎触碰，请清洁干净后再启动打印。
• 模型默认设置为 2 层壁厚，如需提升承重能力，可自行增加壁厚层数。

如果这款模型对您有帮助，恳请助力支持，非常感谢！

Minimalist Heart-shaped Hook

Core Features

1. DesignMinimalist heart-shaped profile with a stylish, versatile look. It is mounted with nail-free adhesive, which delivers firm bonding while keeping walls intact.
2. Structural AdvantageThis design adopts a split-part printing solution that effectively addresses the common drawback of weak Z-axis interlayer bonding in 3D printing. Its load-bearing capacity outperforms standard one-piece printed hooks, and it can be assembled with simple steps.
3. Printing ConvenienceComes with pre-optimized configuration files. Simply select the corresponding filament on a computer or mobile device for one-click slicing and printing, which greatly improves the printing success rate.
4. Material EfficiencyThe model features a support-free structure, eliminating excess filament waste during printing and effectively lowering printing costs.
5. Parameter CompatibilityBuilt with optimized process parameters. When switching filaments, you can directly apply the official parameters for the target material with no extra tuning required.

Printing Tips

• Please confirm the print bed is clean and tidy before printing. Do not touch the printing surface directly with bare hands. If you accidentally touch it, clean the surface thoroughly before starting a print job.
• The model is set to 2 wall layers by default. For higher load-bearing performance, you may increase the number of wall layers manually.

If this model is helpful to you, your support would be greatly appreciated. Thank you very much!