Request:  Morgue Storage Table/Work Bench

Miniature stainless-style storage bench with sliding-door cabinet design and industrial work surface. Suitable for morgues, laboratories, hospitals, funeral homes, workshops, dollhouses, and detailed miniature scenes.

How to size to the "Dollhouse" scale desired:

Do a search on the internet for actual size of the model in the REAL WORLD.

Then,

REAL SIZE ÷ 12 = DOLLHOUSE SIZE

Then convert to millimeters for the slicer.

Find a conversion webpage on the internet.  Bookmark it for future use.

Example:

MICROWAVE EXAMPLE

Average real microwave width: 20 inches

1:12 scale: 20 ÷ 12 = 1.67 inches

Convert to mm: 1.67 × 25.4 = 42.4 mm

So: a realistic 1:12 microwave should be about 42 mm wide. 

COMMON DOLLHOUSE SCALE FORMULAS

1:12 scale: Real size ÷ 12

1:24 scale: Real size ÷ 24

1:48 scale: Real size ÷ 48

IN THE SLICER

Set these found measurements in the slicer in millimeters. Slice and print.

Today, you can have any AI do all of it for you.  Go to ChatGPT and ask the AI the "REAL" world size of an object/model, then have the AI tell you what measurement you should set the model in your slicer.  All the work is done for you.  Just be sure to describe the object/model in as much detail possible.  If fact, the AI can walk you through it.

Good luck!

♨️ ANNEALING — Hardening Your PLA model

Annealing your PLA models can improve strength by 10 – 20 %.

If you plan to handle this regularly, annealing is highly recommended.

If your goal is display or occasional play, annealing is optional.

The appearance and finish remain unchanged.

🔗 More info: Annealing PLA Prints for Strength — Easy Ways (All3DP)

[https://all3dp.com/2/annealing-pla-prints-for-strength-easy-ways/](https://all3dp.com/2/annealing-pla-prints-for-strength-easy-ways/)

Setting I use with my Bambu A1 mini and my Bambu P1S printers:

Copy or Drag n Drop for usage if you like.