Another “Deep Regrets” insert, sharing from Martin H.'s remix (for the depth card holders) with original card holders for non-depth cards and token trays. Layout was inspired by scuzzy19's insert: [https://makerworld.com/en/models/1372205-deep-regrets-insert](https://makerworld.com/en/models/1372205-deep-regrets-insert). This was designed to hold the base game plus the Lamentable Tentacles expansion.

Notable Details:

• Supports sleeves for both large and small cards.
• Card holders have text labels to help when placing stacks between the dividers.
• Card holders can be used while playing to keep sleeved stacks from falling over (but tolerances are tight with sleeves so it can be difficult to pull out just one card at a time).
• Has a dedicated space for regret and instruction cards for the Lamentable Tentacles expansion.
• Depth card holders are designed for play on the board, holding 13 cards in each shoal, including a 4th holder for the Even Deeper Regrets expansion.
• Dice can be kept in the bag and stowed on top of the token tray.
• No lid lift.

Print Notes:

• “misc_card_holder” must be printed on it's back and I'd recommend a 6mm brim and tree supports (see the last photo for an example). The supports might leave scarring on the dividers, so carefully use a fine metal file to take down any sharp edges.
• Nothing else needs supports.
• Printed in Polymaker Panchroma Matte PLA (Arctic Teal and Lime Green are very near matches to the box colors).