This set of files was created to 3d print the side pieces of a display unit. The main hexagon piece will hold two pieces of 1"x4" wood boards cut to your needed length. We cut ours to roughly 2' 5" (~737mm) in length.  Our goal with this project was to create a display unit that was easy to assemble and dissemble at a craft or trade show. Our other requirement was for the unit to be to changeable depending upon the event.  Though if needed, one can glue or gloop together the pieces for a more permanent result but it is not necessary. Each piece of the unit connects together with pins except for the bottom support piece which has the pins as part of the file. 

The 3mf file contains one of each of the items except for the pins which we have put several on one of the boards. The amount that you will need of each items depends on how big you want your display to be. Eventually, we will be adding information on how many of each item is needed depending upon certain displays. The side pieces that have the divots listed on the file name have a small divot that will allow one to add a small sign if put in the correct position. 

Please note that the files with holes in them will need supports.