This two-piece y-splitter made for H2D and H2C printers is ideal set and forget solution for those who want to use right nozzle for both TPU and normal printing.
Just connect one inlet on the splitter with any AMS that you have and the other one to TPU Bypass inlet in the back.
Works very well with TPU Feeding Assist Module making it a perfect closed loop TPU printing system.

Y-splitter can be removed from its housing with a press of a button for easy cleaning and maintenance while transparent design allows you to spot any filament breakage or jam.
Utilizes push to fit ECAS04 Connectors.

NOTE: please make sure PTFE tubes are fully inserted into the splitter to reduce feeding resistance.

Required parts:

• Printed parts
• ECAS04 PTFE Connector (x3)

• Compression Spring 65Mn 0.4*3*10 mm (x1) 

  Can be found here: [https://www.aliexpress.com/item/1005005402501364.html](https://www.aliexpress.com/item/1005005402501364.html)

Materials:

• PC Transparent
• Support for PA/PET (Can be substituted with ABS or ASA)