This is a personalised "Lacing Vehicles" play set, designed to develop fine motor skills through hands-on play. It features a car-shaped board that can be customised with a name, like "Ondrejko" shown here, along with a collection of colourful, small vehicle blocks to practice lacing and sequencing.

Non printed hardware needed:

1.) Thick Lace. The one I used was around 6mm thick. But 5-7mm will do also.
2.) Glue. I used E6000, but I had luck also with hot glue or glue for wood. It should be thick consistency so the lace does not absorb it quickly. I really recommend E600 or Gorilla glue.

Assembly steps.
1.) Twist the ends of lace to sharp point
2.) Put glue to needle or traffic cone
3.) Twist the lace inside until it is fully in
4.) Let rest for 24Hrs so the glue has time to cure.

⚠️ WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.

Personal experience:

I have this tested with my 2,3 and 4 year old and none of them were able to break it. So it is parent approved and tested in roughest conditions possible.