Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 220x180mm in size

You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.8mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #fec600 PLA BambuLab Basic Sunflower Yellow  Transmission Distance: 4.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #18 (1.52mm) swap to Dark Gray
    At layer #20 (1.68mm) swap to Sunflower Yellow
    At layer #27 (2.24mm) swap to Jade White
    At layer #30 (2.48mm) swap to Black for the rest.